Iniciar sesión
€EUR
Carrito
Buscar productos...
Single Stud Type Junction Blocks 200A Outer Screw(M8) Outer Screw(M8) Flange Mounting Black
Características principales
Especificaciones
Atributo
Valor
Buscar
Fabricante
Renhotec
Color
Negro
Característica de montaje
Bulkhead
Contacto Finalizar
Estaño
Terminación del contacto
Tornillo
Corriente nominal
200A
Tipo de montaje
Montaje en panel
Material de contacto
Latón
Tensión nominal
600V
Clasificación de inflamabilidad
UL94 V-0
Material aislante
PA66
Estilo de carrocería
tachonado
Hilo de terminación
M8
Descripción
- Pass current through a panel
- Used to connect two or more voltage lines
- Nickel plated brass post
- Tin plated brass conductive nuts
- Stainless steel torque fastener nuts
- Termination ratings ranging from 20-500A
Feed-Through & Single Stud Junction Blocks
Metabee feedthrough and Single stud terminal blocks are used for heavy-duty ground or power connection points in AC or DC circuits. The modular construction provides design and manufacturing flexibility with mounting options ideal for transformers, communications and computer power sections, and various vehicle electrical systems.
Guía de envío
Envío | Periodo de entrega | Metabee envía los pedidos una vez al día alrededor de las 17:00 h, excepto los domingos. Una vez enviado, el tiempo de entrega estimado depende del transportista que elija. Envío Exprés: 3-7 días. Correo Estándar: 7-20 días. | |
| Tarifas de envío | Las tarifas de envío para tu pedido se pueden encontrar en el carrito de compras. | ||
| Opciones de envío | Ofrecemos servicios de entrega exprés y estándar. | ||
| Seguimiento de envío | Te notificaremos por correo electrónico con el número de seguimiento una vez que el pedido sea enviado. Puedes seguir tu pedido utilizando la función “Seguir mi pedido”. | ||
| Devolución/Garantía | Devolución | Normalmente se aceptan devoluciones cuando se completan dentro de los 30 días desde la fecha de envío, por favor contacta con el servicio al cliente para obtener una autorización de devolución. Las piezas deben estar sin usar y en su embalaje original. El cliente debe hacerse cargo del envío | |
| Garantía | Todas las compras de Metabee incluyen una política de devolución de 30 días y una garantía de 1 año contra defectos de fabricación. | ||
| Esta garantía no se aplicará a ningún artículo donde los defectos hayan sido causados por ensamblaje incorrecto por parte del cliente, incumplimiento de las instrucciones, modificación del producto, operación negligente o incorrecta por parte del cliente | |||
| Pedidos | Cómo comprar | Metabee acepta pedidos en línea. | |
| Añadir al carrito > Pagar > Enviar pedido > Completar pago > Entrega | |||
| Pago | PayPal, tarjeta de crédito incluye Visa, Master, American Express, transferencia bancaria. | ||
Recomendado para ti
Reseñas(16)
4 /5
Todas las reseñas provienen de compradores verificados
5
50%
4
44%
3
6%
2
0%
1
0%
D****.
I use a crane to hoist objects to a mezzanine in my garage. I ordered these doohickeys to make the connection from crane leads to power supply. They are solid and substantial. Now the electrons make their dates and the current flows like its on a cruise to the Caribbean baby.
The price, time to deliver, quality, and general aesthetics make me beam with happiness and I dig that feeling.
Buy it, try it, and try not to fry it.
D****.
I use a crane to hoist objects to a mezzanine in my garage. I ordered these doohickeys to make the connection from crane leads to power supply. They are solid and substantial. Now the electrons make their dates and the current flows like its on a cruise to the Caribbean baby.
The price, time to deliver, quality, and general aesthetics make me beam with happiness and I dig that feeling.
Buy it, try it, and try not to fry it.
D****C
For surface mount applications these will work well. The nuts thread smoothly onto the studs and lock washers are provided. Four small screws are also provided for mounting.
D****C
For surface mount applications these will work well. The nuts thread smoothly onto the studs and lock washers are provided. Four small screws are also provided for mounting.
E****S
IT WAS AVAILABLE, PRICE WAS REASONABLE, I HAD A SPECIFIC NEED FOR SUCH AN ITEM, HAD NO IDEA ANYTHING LIKE THIS EXISTED. WAS HAPPY TO FIND THAT IT DOES. TO KEEP THIS AS SIMPLE AS POSSIBLE. THE POWER OUTPUT FROM A FORD 2G ALTERNATOR, GOING TO THE STARTER SOLENOID RELAY (SEE IMAGE 4) CONSISTS OF 3 LARGE (10 AWG) WIRES REDUCED TO A SMALLER 14 AWG FUSIBLE LINK ( A SLOW BURNING FUSE IN WIRE FORM ). OVER TIME, THEY NEED TO BE REPLACED, BUT YOU CAN'T REPLACE JUST THE FUSIBLE LINK, YOU HAVE TO BUY THE WHOLE HARNESS. WITH THE ITEM BEING DISCUSSED, I WAS ABLE TO FABRICATE A WAY TO REPLACE JUST THE FUSIBLE LINK. I COULD HAVE USED JUST A STANDARD 3/8" BOLT, NUT AND WASHER SET UP, BUT NO CLEAN, SAFE WAY TO INSULATE IT OTHER THAN ELECTRICAL TAPE. THIS STUD JUNCTION IS PERFECT FOR THE JOB.
E****S
IT WAS AVAILABLE, PRICE WAS REASONABLE, I HAD A SPECIFIC NEED FOR SUCH AN ITEM, HAD NO IDEA ANYTHING LIKE THIS EXISTED. WAS HAPPY TO FIND THAT IT DOES. TO KEEP THIS AS SIMPLE AS POSSIBLE. THE POWER OUTPUT FROM A FORD 2G ALTERNATOR, GOING TO THE STARTER SOLENOID RELAY (SEE IMAGE 4) CONSISTS OF 3 LARGE (10 AWG) WIRES REDUCED TO A SMALLER 14 AWG FUSIBLE LINK ( A SLOW BURNING FUSE IN WIRE FORM ). OVER TIME, THEY NEED TO BE REPLACED, BUT YOU CAN'T REPLACE JUST THE FUSIBLE LINK, YOU HAVE TO BUY THE WHOLE HARNESS. WITH THE ITEM BEING DISCUSSED, I WAS ABLE TO FABRICATE A WAY TO REPLACE JUST THE FUSIBLE LINK. I COULD HAVE USED JUST A STANDARD 3/8" BOLT, NUT AND WASHER SET UP, BUT NO CLEAN, SAFE WAY TO INSULATE IT OTHER THAN ELECTRICAL TAPE. THIS STUD JUNCTION IS PERFECT FOR THE JOB.
G****r
I bought these so i could move the deep cycle battery in my row boat up to the front to distribute the weight better. I had to run longer power cables back from battery and use these to connect the trolling motor with the extension cables to the battery. They work slicker than snail snot! Good product!
G****r
I bought these so i could move the deep cycle battery in my row boat up to the front to distribute the weight better. I had to run longer power cables back from battery and use these to connect the trolling motor with the extension cables to the battery. They work slicker than snail snot! Good product!
J****m
Item looks nice and well built but i have not used it yet.
J****m
Item looks nice and well built but i have not used it yet.
K****F
I used this a junction block to split power front and rear for winch connections. Seems to work well.
K****F
I used this a junction block to split power front and rear for winch connections. Seems to work well.
M****y
Great for the price, well built, just don??t torque the hell out of it, been using the same 2 for awhile now
M****y
Great for the price, well built, just don??t torque the hell out of it, been using the same 2 for awhile now
m****n
Needed disconnect terminal by the fuse block on a boat rewiring project. These did the trick quite nicely
m****n
Needed disconnect terminal by the fuse block on a boat rewiring project. These did the trick quite nicely