Iniciar sesión
€EUR
Carrito
Buscar productos...
Tipo de cable de abrazadera macho UHF recto
Características principales
Hoja de datos y recursos
id20220500797_rht-630-0070
En stock
Cant.
1
P.Unit.
€ 4.96
Precio ext.
€ 4.96
€ 4.96
Cant.
P.Unit.
Precio ext.
1+
€4.96
€ 4.96
200+
€4.46
€ 892.00
1000+
€3.79
€ 3790.00
2000+
€3.04
€ 6080.00
Especificaciones
Atributo
Valor
Buscar
Fabricante
Renhotec
Orientación
Derecho
Tipo de conector
Enchufar
Tipo de fijación
roscado
Contacto Finalizar
Plata
Tipo de montaje
Montaje de cables
Material de contacto
Latón
Acabado de la carcasa
Niquelado
Material aislante
PTFE
Tipo de contacto
Pasador macho
Terminación del escudo
Abrazadera
Descripción
- The threaded coupling mechanism is easy to assembly with high durability
- Can be Customized for unique material or performance requirements
- Crimp termination type provides a lower-cost method of installation
- Large-size threaded couplings are a robust design
- Low specification requirements and low cost
What is the UHF Connector?
Originally intended for use as a video connector in radar applications, the UHF coaxial connector was developed as a general-purpose unit for use in low-frequency systems from 0.6 - 300 MHz. Invented in the 1930s for use in the radio industry, UHF is an acronym for Ultra High Frequency because 300 MHz was considered high frequency at the time. They can be used when impedance matching is not required.
UHF connectors use threaded coupling. UHF connectors are economical and widely used because of their ease of assembly. The UHF solderable screw-in termination feature does not require a special crimping tool.
View of UHF Connector
Can be Customized for unique material or performance requirements
The connector design was invented in the 1930s for use in the radio industry, and is a shielded form of the "banana plug". It is a widely used standard connector for HF transmission lines on full-sized radio equipment.
Large size threaded couplings are a robust design
The Ultra High-Frequency (UHF) connector is a threaded coaxial connector that was developed in the 1930s by engineers at Amphenol. The UHF connector has individual male and female radio frequency connectors that form a mated connection by thread coupling.
Crimp termination type provides a lower cost method of installation
This is a cost-effective, robust radio-frequency connector that is suitable for general-purpose use.
- Antennas
- Military
- Distributed Antenna Systems (DAS)
- Public Address Systems
- Low-Frequency Applications
Hoja de datos y recursos
id20220500797_rht-630-0070
Guía de envío
Envío | Periodo de entrega | Metabee envía los pedidos una vez al día alrededor de las 17:00 h, excepto los domingos. Una vez enviado, el tiempo de entrega estimado depende del transportista que elija. Envío Exprés: 3-7 días. Correo Estándar: 7-20 días. | |
| Tarifas de envío | Las tarifas de envío para tu pedido se pueden encontrar en el carrito de compras. | ||
| Opciones de envío | Ofrecemos servicios de entrega exprés y estándar. | ||
| Seguimiento de envío | Te notificaremos por correo electrónico con el número de seguimiento una vez que el pedido sea enviado. Puedes seguir tu pedido utilizando la función “Seguir mi pedido”. | ||
| Devolución/Garantía | Devolución | Normalmente se aceptan devoluciones cuando se completan dentro de los 30 días desde la fecha de envío, por favor contacta con el servicio al cliente para obtener una autorización de devolución. Las piezas deben estar sin usar y en su embalaje original. El cliente debe hacerse cargo del envío | |
| Garantía | Todas las compras de Metabee incluyen una política de devolución de 30 días y una garantía de 1 año contra defectos de fabricación. | ||
| Esta garantía no se aplicará a ningún artículo donde los defectos hayan sido causados por ensamblaje incorrecto por parte del cliente, incumplimiento de las instrucciones, modificación del producto, operación negligente o incorrecta por parte del cliente | |||
| Pedidos | Cómo comprar | Metabee acepta pedidos en línea. | |
| Añadir al carrito > Pagar > Enviar pedido > Completar pago > Entrega | |||
| Pago | PayPal, tarjeta de crédito incluye Visa, Master, American Express, transferencia bancaria. | ||
Recomendado para ti
Reseñas(30)
4 /5
Todas las reseñas provienen de compradores verificados
5
37%
4
63%
3
0%
2
0%
1
0%
c****r
Ordered these so I could run a cb coax it to the cab of our motorhome. Very happy with how they worked
c****r
Ordered these so I could run a cb coax it to the cab of our motorhome. Very happy with how they worked
D****r
replaced ends on a couple old antenna and they work great. They solder up very well and the core takes a lot of heat with no damage. I will buy a larger pack of these to just have around for future upgrades.
D****r
replaced ends on a couple old antenna and they work great. They solder up very well and the core takes a lot of heat with no damage. I will buy a larger pack of these to just have around for future upgrades.
D****h
Installed very easy over a RG8 cable.
D****h
Installed very easy over a RG8 cable.
D****h
I would have liked the product to come with Teflon washers similar to the ones I purchased in the past.
D****h
I would have liked the product to come with Teflon washers similar to the ones I purchased in the past.
D****n
I would not call ANY MANUFACTURER'S PL-259 easy to install. All have the same difficulty not heating the connector and the coax braid hot enough to get the solder to flow on both. However silver plated connectors like this are the best of all the connectors. Other's use plating which does not accept solder well. These connectors are good quality and priced where they should sell well at right now.
D****n
I would not call ANY MANUFACTURER'S PL-259 easy to install. All have the same difficulty not heating the connector and the coax braid hot enough to get the solder to flow on both. However silver plated connectors like this are the best of all the connectors. Other's use plating which does not accept solder well. These connectors are good quality and priced where they should sell well at right now.
D****r
Good quality with Teflon Dielectric. No issues with melting during soldering.
D****r
Good quality with Teflon Dielectric. No issues with melting during soldering.
D****n
PL259. Put on the end of the coax. Fit. Worked.
D****n
PL259. Put on the end of the coax. Fit. Worked.
D****s
Love or that fact that I can replace those awful ends on the Wilson antenna from the factory and they even lowered my swr more
D****s
Love or that fact that I can replace those awful ends on the Wilson antenna from the factory and they even lowered my swr more
D****g
I bought some of those cheaper PL259 plugs with the brown colored plastic and was really disappointed with them when I tried to solder the center conductor only to find that the plastic melted. These, however, are much better. I have used two of them so far in setting up my ham shack and they soldered with no melting of the plastic material. Yes, these cost much more than the brown colored ones, but as they say - "you get what you pay for". Don't make the same mistake I did in buying the others - BUY THESE - they are worth it.
D****g
I bought some of those cheaper PL259 plugs with the brown colored plastic and was really disappointed with them when I tried to solder the center conductor only to find that the plastic melted. These, however, are much better. I have used two of them so far in setting up my ham shack and they soldered with no melting of the plastic material. Yes, these cost much more than the brown colored ones, but as they say - "you get what you pay for". Don't make the same mistake I did in buying the others - BUY THESE - they are worth it.
E****P
These are soooo much better, and only slightly more expensive. I just connected to RG142, the grip is so good I might not bother to solder.
Very nice.
E****P
These are soooo much better, and only slightly more expensive. I just connected to RG142, the grip is so good I might not bother to solder.
Very nice.
J****n
Easy to use and install. Sturdy construction used with a heavy duty ball mount.
J****n
Easy to use and install. Sturdy construction used with a heavy duty ball mount.
P****t
Everything fits together good. The surfaces took solder good.
P****t
Everything fits together good. The surfaces took solder good.
P****z
Good quality, easy to use and smooth transaction.
P****z
Good quality, easy to use and smooth transaction.
P****A
Perfect for the ham radio set up. Easy to use and solder.
P****A
Perfect for the ham radio set up. Easy to use and solder.
R****.
The design on the shielding soldering point is much better than others that have the larger holes. Additionally the plastic around the center pin seems more sturdy than other units I??ve used before. These did not melt during soldering.
R****.
The design on the shielding soldering point is much better than others that have the larger holes. Additionally the plastic around the center pin seems more sturdy than other units I??ve used before. These did not melt during soldering.
En stock
Cant.
1
P.Unit.
€ 4.96
Precio ext.
€ 4.96
€ 4.96
Cant.
P.Unit.
Precio ext.
1+
€4.96
€ 4.96
200+
€4.46
€ 892.00
1000+
€3.79
€ 3790.00
2000+
€3.04
€ 6080.00