Assemblage de câbles RF N mâle à N mâle avec câble coaxial RG316 de 500 cm, 50 ohms

Cables appear to be well made, cable ends to each connector are sealed with heat shrink tubing. Purchased cables for connection between radios and meters. Still waiting for new UHF antennas to arrive to complete installation. Would probably again if needed in longer lengths.

Cables appear to be well made, cable ends to each connector are sealed with heat shrink tubing. Purchased cables for connection between radios and meters. Still waiting for new UHF antennas to arrive to complete installation. Would probably again if needed in longer lengths.

Great product! Excellent cable well made

Great product! Excellent cable well made

So I took this into the lab and first checked the connectors, which were pushing the short side of the allowed range, but still pass fine. That's important since a center pin that's too long can ruin the connector on the product you connect them to. From there I took it over to the network analyzer and tested the path loss, which was less than half a dB over the expected range of use, maxing out under 0.6 dB at 6 GHz. In all exactly what I'd expect from a short cable like this. The one thing that makes me wonder as to the cable design itself is that it's very stiff and bends into place, leading me to believe it's either using aluminum for the outer conductor or it's a "filled" copper conductor with solder embedded in the brain intentionally to create a formable cable. That makes this cable fine for its intended application of a permanent installation of a signal booster, etc. That way you can route the cable and it will stay where you put it. You wouldn't want to use this for a general purpose cable where you want flexibility.

So I took this into the lab and first checked the connectors, which were pushing the short side of the allowed range, but still pass fine. That's important since a center pin that's too long can ruin the connector on the product you connect them to. From there I took it over to the network analyzer and tested the path loss, which was less than half a dB over the expected range of use, maxing out under 0.6 dB at 6 GHz. In all exactly what I'd expect from a short cable like this. The one thing that makes me wonder as to the cable design itself is that it's very stiff and bends into place, leading me to believe it's either using aluminum for the outer conductor or it's a "filled" copper conductor with solder embedded in the brain intentionally to create a formable cable. That makes this cable fine for its intended application of a permanent installation of a signal booster, etc. That way you can route the cable and it will stay where you put it. You wouldn't want to use this for a general purpose cable where you want flexibility.

works great for my scanner antenna that is in my attic, good cable for the price

works great for my scanner antenna that is in my attic, good cable for the price

I use RF stuff a lot these cables are of high quality. Connectors crimped Good. Cables are not stiff Rather flexible and very low loss at around 65 MHz Priced higher than similar items but I will buy these again.

I use RF stuff a lot these cables are of high quality. Connectors crimped Good. Cables are not stiff Rather flexible and very low loss at around 65 MHz Priced higher than similar items but I will buy these again.

Improved signal strength. Works very good and VHSUHF.

Improved signal strength. Works very good and VHSUHF.

Cable appears to be of good quality with tightly woven shielding slightly visible through the jacket. N connectors are standard grade but should be good for my application. The heat shrink around connections and coax is of good quality and its longer length provides a little extra strain relief. Due to the specifics of my install, I still taped up points of potential moisture ingress with outdoor rated 3M tape, provided a service/drip loop and secured with cable ties. It should hold up well. Signal performance on VHF (2m) and UHF (70cm) are on par or better than my expectations for the given installation.

Cable appears to be of good quality with tightly woven shielding slightly visible through the jacket. N connectors are standard grade but should be good for my application. The heat shrink around connections and coax is of good quality and its longer length provides a little extra strain relief. Due to the specifics of my install, I still taped up points of potential moisture ingress with outdoor rated 3M tape, provided a service/drip loop and secured with cable ties. It should hold up well. Signal performance on VHF (2m) and UHF (70cm) are on par or better than my expectations for the given installation.

Just want to say that this is a good quality cable with HD N-type connector. good buy

Just want to say that this is a good quality cable with HD N-type connector. good buy

This product worked as expected. We encountered no problems. It arrived on time. The cable was used for a radio antenna.

This product worked as expected. We encountered no problems. It arrived on time. The cable was used for a radio antenna.

It works well for me on the 70cm band. I only have 25ft of it and I tape it close to the connector so the weight of the cable isn't pulling on it. I also tape couple areas on the way down the pole. Very little loss (only 25 foot run) . Have it connected to diamond x50. My vhf swr fluctuates, but I believe that's the antenna. Connectors look good. But you never knew know until you take it apart someday. Anything changes I'll update.

It works well for me on the 70cm band. I only have 25ft of it and I tape it close to the connector so the weight of the cable isn't pulling on it. I also tape couple areas on the way down the pole. Very little loss (only 25 foot run) . Have it connected to diamond x50. My vhf swr fluctuates, but I believe that's the antenna. Connectors look good. But you never knew know until you take it apart someday. Anything changes I'll update.

I used this cable at my Transmitter Site (FM Radio Station) as a short jumper to connect to the hardline. A well made LMR400 jumper cable. An excellent value for the money in my opinion!

I used this cable at my Transmitter Site (FM Radio Station) as a short jumper to connect to the hardline. A well made LMR400 jumper cable. An excellent value for the money in my opinion!

My LMR400 arrived as advertised exactly with MPD Digital on the heat shrink and no cable shorts or faults. Working as expected.

My LMR400 arrived as advertised exactly with MPD Digital on the heat shrink and no cable shorts or faults. Working as expected.

The build quality on these cables is outstanding. They are made in the United States by someone who cares about cables. I don't have the equipment to test these rigorously but I am impressed by them.

The build quality on these cables is outstanding. They are made in the United States by someone who cares about cables. I don't have the equipment to test these rigorously but I am impressed by them.

Great to see Fine workmanship on the connectors, sleeves and construction. I bought four different lengths, all the same and would buy again if needed.

Great to see Fine workmanship on the connectors, sleeves and construction. I bought four different lengths, all the same and would buy again if needed.

Good quality low loss coax. I bought this for a cell phone amplifier system. It's been in service now for 6 months, works great, industry standard fittings, easy to work with. Would buy again.

Good quality low loss coax. I bought this for a cell phone amplifier system. It's been in service now for 6 months, works great, industry standard fittings, easy to work with. Would buy again.

I needed a couple of patch cords from my coax switch to the radios

I needed a couple of patch cords from my coax switch to the radios

Quality made cable. No problems. Will stay with this company for future cable orders.

Quality made cable. No problems. Will stay with this company for future cable orders.

I now buy MPD preferentially, solid, superbly constructed cables that do exactly what I need done.

I now buy MPD preferentially, solid, superbly constructed cables that do exactly what I need done.

Professionally made. I hate soldering N Connector, this solve my needs for interconnecting a pre-amplifier

Professionally made. I hate soldering N Connector, this solve my needs for interconnecting a pre-amplifier

Nice jumper made with quality coax. The shrink tubing at the connectors sure helps with sealing and also for stress relief. Please note that this product is intended for stationary use only, being the center conductor is solid.

Nice jumper made with quality coax. The shrink tubing at the connectors sure helps with sealing and also for stress relief. Please note that this product is intended for stationary use only, being the center conductor is solid.

Reason I got this was for a cell booster. Made a world of difference compared to the RG6 cable I had. Download speeds on 3g went from 1mbps to 3mbps and my uploads went from 0.5mbps to 1mbps. Cell tower is 32km away from us over 4 hills. Well worth getting quality cable! Cable itself is pretty rigid and tough. Had to get an adapter to go from the antenna to the cable and from the booster to the cable. Worked fine without issues.

Reason I got this was for a cell booster. Made a world of difference compared to the RG6 cable I had. Download speeds on 3g went from 1mbps to 3mbps and my uploads went from 0.5mbps to 1mbps. Cell tower is 32km away from us over 4 hills. Well worth getting quality cable! Cable itself is pretty rigid and tough. Had to get an adapter to go from the antenna to the cable and from the booster to the cable. Worked fine without issues.

LMR is LMR perfectly as delivered and works as advertised.

LMR is LMR perfectly as delivered and works as advertised.

very good feedline hghly recommend!!! this is the real LMR-400!!

very good feedline hghly recommend!!! this is the real LMR-400!!

This worked out great! i have placed this in service; it is stiff but I made it work and expected it to be stiff. Nevertheless, it has lived up to my expectations in a big way.

This worked out great! i have placed this in service; it is stiff but I made it work and expected it to be stiff. Nevertheless, it has lived up to my expectations in a big way.

Using it with a 1Gz ADS-B Receiver and it's doing the trick.

Using it with a 1Gz ADS-B Receiver and it's doing the trick.

Great products as always this is a must if your doing my type of work, there are many time i need a product like this thanks

Great products as always this is a must if your doing my type of work, there are many time i need a product like this thanks

Excellent quality cable and connectors. I used this for an ADS-B antenna and performance is right where it should be for the cable length. The connectors are solidly installed and the shrink tubing over the connectors and cable ends provide a solid physical connection. Still, one should also anchor the cable and not let it hang to prevent any possible separation. Very happy with this purchase and I plan to replace some RG-8 cables with this since the performance will be better at UHF frequencies with the LMR400.

Excellent quality cable and connectors. I used this for an ADS-B antenna and performance is right where it should be for the cable length. The connectors are solidly installed and the shrink tubing over the connectors and cable ends provide a solid physical connection. Still, one should also anchor the cable and not let it hang to prevent any possible separation. Very happy with this purchase and I plan to replace some RG-8 cables with this since the performance will be better at UHF frequencies with the LMR400.

Not much to say - plugged it in, turned it on and it worked as expected.

Not much to say - plugged it in, turned it on and it worked as expected.

Wouldn't hesitate buying another.Cant go wrong with this one. I have total confidence this will last.

Wouldn't hesitate buying another.Cant go wrong with this one. I have total confidence this will last.

Durable cable, good connectors, low loss. I am using for 1200mhz radio application and its working great. I have it running between a kenwood tribander and a tribad 2m/70cm/23cm antenna.

Durable cable, good connectors, low loss. I am using for 1200mhz radio application and its working great. I have it running between a kenwood tribander and a tribad 2m/70cm/23cm antenna.

High quality jumper good for UHF frequencies. Very stiff though, kind of as expected for LMR400, but seems to be even stiffer than the long runs of LMR400 I use. This jumper is used in my rover between the 432MHz transverter and the amplifier.

High quality jumper good for UHF frequencies. Very stiff though, kind of as expected for LMR400, but seems to be even stiffer than the long runs of LMR400 I use. This jumper is used in my rover between the 432MHz transverter and the amplifier.

Bought a few months ago, this wire was installed outside and has held up so far, we will see about the winter.

Bought a few months ago, this wire was installed outside and has held up so far, we will see about the winter.

Wish I had gotten something a little more flexible. Fine for permanent installs but for packing and going it is a bit much to handle.

Wish I had gotten something a little more flexible. Fine for permanent installs but for packing and going it is a bit much to handle.

Top of The Line Cable very pleased and satisfied with quality of the Cable and I would highly recommend this cable to anyone who is looking for good quality cable

Top of The Line Cable very pleased and satisfied with quality of the Cable and I would highly recommend this cable to anyone who is looking for good quality cable

So far this cable has met my expectations and is working great. I needed to replace my old worn out cable and I also needed a little more length. This was a good choice.

So far this cable has met my expectations and is working great. I needed to replace my old worn out cable and I also needed a little more length. This was a good choice.