Se connecter
€EUR
Panier
Rechercher des produits...
Type de câble à pince mâle UHF droit
Caractéristiques clés
Fiche technique & ressources
id20220500797_rht-630-0070
En stock
Qté.
1
P. Unitaire
€ 4.96
Sous-total
€ 4.96
€ 4.96
Qté.
P. Unitaire
Sous-total
1+
€4.96
€ 4.96
200+
€4.46
€ 892.00
1000+
€3.79
€ 3790.00
2000+
€3.04
€ 6080.00
Spécifications
Attribut
Valeur
Rechercher
Fabricant
Renhotec
Orientation
Droit
Type de connecteur
Prise
Type de fixation
Fileté
Contacter Terminer
Argent
Type de montage
Support de câble
Matériel de contact
Laiton
Finition de la coque
Nickelé
Matériau isolant
PTFE
Type de contact
Broche mâle
Terminaison du bouclier
Serrer
Description
- The threaded coupling mechanism is easy to assembly with high durability
- Can be Customized for unique material or performance requirements
- Crimp termination type provides a lower-cost method of installation
- Large-size threaded couplings are a robust design
- Low specification requirements and low cost
What is the UHF Connector?
Originally intended for use as a video connector in radar applications, the UHF coaxial connector was developed as a general-purpose unit for use in low-frequency systems from 0.6 - 300 MHz. Invented in the 1930s for use in the radio industry, UHF is an acronym for Ultra High Frequency because 300 MHz was considered high frequency at the time. They can be used when impedance matching is not required.
UHF connectors use threaded coupling. UHF connectors are economical and widely used because of their ease of assembly. The UHF solderable screw-in termination feature does not require a special crimping tool.
View of UHF Connector
Can be Customized for unique material or performance requirements
The connector design was invented in the 1930s for use in the radio industry, and is a shielded form of the "banana plug". It is a widely used standard connector for HF transmission lines on full-sized radio equipment.
Large size threaded couplings are a robust design
The Ultra High-Frequency (UHF) connector is a threaded coaxial connector that was developed in the 1930s by engineers at Amphenol. The UHF connector has individual male and female radio frequency connectors that form a mated connection by thread coupling.
Crimp termination type provides a lower cost method of installation
This is a cost-effective, robust radio-frequency connector that is suitable for general-purpose use.
- Antennas
- Military
- Distributed Antenna Systems (DAS)
- Public Address Systems
- Low-Frequency Applications
Fiche technique & ressources
id20220500797_rht-630-0070
Guide de livraison
Livraison | Délai de livraison | Metabee expédie les commandes une fois par jour vers 17h00, sauf le dimanche. Une fois l'expédition effectuée, le délai de livraison estimé dépend du transporteur que vous choisissez. Livraison Express : 3 à 7 jours. Poste Standard : 7 à 20 jours. | |
| Frais de port | Les frais de livraison de votre commande sont consultables dans le panier. | ||
| Options de livraison | Nous proposons des services de livraison express et standard. | ||
| Suivi de livraison | Après l'expédition, nous vous enverrons le numéro de suivi par email. Utilisez la fonction « Suivre ma commande » pour consulter l'état. | ||
| Retour/Garantie | Retour | Les retours sont généralement acceptés sous 30 jours à partir de l'expédition. Contactez le service client pour autorisation. Les produits doivent être non utilisés et dans leur emballage d'origine. Les frais de retour sont à la charge du client. | |
| Garantie | Tous les achats Metabee incluent une politique de retour de 30 jours et une garantie de 1 an contre les défauts de fabrication. | ||
| Cette garantie ne s'applique pas aux produits défectueux dus à un mauvais assemblage par le client, non-respect des instructions, modification du produit, négligence ou mauvaise utilisation. | |||
| Commande | Comment acheter | Metabee prend en charge les commandes en ligne. | |
| Ajouter au panier > Paiement > Soumettre la commande > Finaliser le paiement > Expédition | |||
| Paiement | PayPal, carte de crédit (Visa, MasterCard, American Express), virement bancaire. | ||
Recommandé pour vous
Critiques(30)
4 /5
Toutes les critiques proviennent d'acheteurs vérifiés
5
37%
4
63%
3
0%
2
0%
1
0%
c****r
Ordered these so I could run a cb coax it to the cab of our motorhome. Very happy with how they worked
c****r
Ordered these so I could run a cb coax it to the cab of our motorhome. Very happy with how they worked
D****r
replaced ends on a couple old antenna and they work great. They solder up very well and the core takes a lot of heat with no damage. I will buy a larger pack of these to just have around for future upgrades.
D****r
replaced ends on a couple old antenna and they work great. They solder up very well and the core takes a lot of heat with no damage. I will buy a larger pack of these to just have around for future upgrades.
D****h
Installed very easy over a RG8 cable.
D****h
Installed very easy over a RG8 cable.
D****h
I would have liked the product to come with Teflon washers similar to the ones I purchased in the past.
D****h
I would have liked the product to come with Teflon washers similar to the ones I purchased in the past.
D****n
I would not call ANY MANUFACTURER'S PL-259 easy to install. All have the same difficulty not heating the connector and the coax braid hot enough to get the solder to flow on both. However silver plated connectors like this are the best of all the connectors. Other's use plating which does not accept solder well. These connectors are good quality and priced where they should sell well at right now.
D****n
I would not call ANY MANUFACTURER'S PL-259 easy to install. All have the same difficulty not heating the connector and the coax braid hot enough to get the solder to flow on both. However silver plated connectors like this are the best of all the connectors. Other's use plating which does not accept solder well. These connectors are good quality and priced where they should sell well at right now.
D****r
Good quality with Teflon Dielectric. No issues with melting during soldering.
D****r
Good quality with Teflon Dielectric. No issues with melting during soldering.
D****n
PL259. Put on the end of the coax. Fit. Worked.
D****n
PL259. Put on the end of the coax. Fit. Worked.
D****s
Love or that fact that I can replace those awful ends on the Wilson antenna from the factory and they even lowered my swr more
D****s
Love or that fact that I can replace those awful ends on the Wilson antenna from the factory and they even lowered my swr more
D****g
I bought some of those cheaper PL259 plugs with the brown colored plastic and was really disappointed with them when I tried to solder the center conductor only to find that the plastic melted. These, however, are much better. I have used two of them so far in setting up my ham shack and they soldered with no melting of the plastic material. Yes, these cost much more than the brown colored ones, but as they say - "you get what you pay for". Don't make the same mistake I did in buying the others - BUY THESE - they are worth it.
D****g
I bought some of those cheaper PL259 plugs with the brown colored plastic and was really disappointed with them when I tried to solder the center conductor only to find that the plastic melted. These, however, are much better. I have used two of them so far in setting up my ham shack and they soldered with no melting of the plastic material. Yes, these cost much more than the brown colored ones, but as they say - "you get what you pay for". Don't make the same mistake I did in buying the others - BUY THESE - they are worth it.
E****P
These are soooo much better, and only slightly more expensive. I just connected to RG142, the grip is so good I might not bother to solder.
Very nice.
E****P
These are soooo much better, and only slightly more expensive. I just connected to RG142, the grip is so good I might not bother to solder.
Very nice.
J****n
Easy to use and install. Sturdy construction used with a heavy duty ball mount.
J****n
Easy to use and install. Sturdy construction used with a heavy duty ball mount.
P****t
Everything fits together good. The surfaces took solder good.
P****t
Everything fits together good. The surfaces took solder good.
P****z
Good quality, easy to use and smooth transaction.
P****z
Good quality, easy to use and smooth transaction.
P****A
Perfect for the ham radio set up. Easy to use and solder.
P****A
Perfect for the ham radio set up. Easy to use and solder.
R****.
The design on the shielding soldering point is much better than others that have the larger holes. Additionally the plastic around the center pin seems more sturdy than other units I??ve used before. These did not melt during soldering.
R****.
The design on the shielding soldering point is much better than others that have the larger holes. Additionally the plastic around the center pin seems more sturdy than other units I??ve used before. These did not melt during soldering.
En stock
Qté.
1
P. Unitaire
€ 4.96
Sous-total
€ 4.96
€ 4.96
Qté.
P. Unitaire
Sous-total
1+
€4.96
€ 4.96
200+
€4.46
€ 892.00
1000+
€3.79
€ 3790.00
2000+
€3.04
€ 6080.00