Accedi
€EUR
Carrello
Cerca prodotti...
Tipo di cavo con morsetto maschio UHF dritto
Caratteristiche principali
Scheda tecnica e risorse
id20220500797_rht-630-0070
Disponibile
Qtà.
1
P.Unit.
€ 4.96
Totale
€ 4.96
€ 4.96
Qtà.
P.Unit.
Totale
1+
€4.96
€ 4.96
200+
€4.46
€ 892.00
1000+
€3.79
€ 3790.00
2000+
€3.04
€ 6080.00
Specifiche
Attributo
Valore
Cerca
Produttore
Renhotec
Orientamento
Dritto
Tipo di connettore
Tappo
Tipo di fissaggio
Filettato
Contatta Fine
Argento
Tipo di montaggio
Montaggio su cavo
Materiale di contatto
Ottone
Finitura della scocca
Nichelato
Materiale isolante
PTFE
Tipo di contatto
Perno maschio
Terminazione dello scudo
MORSETTO
Descrizione
- The threaded coupling mechanism is easy to assembly with high durability
- Can be Customized for unique material or performance requirements
- Crimp termination type provides a lower-cost method of installation
- Large-size threaded couplings are a robust design
- Low specification requirements and low cost
What is the UHF Connector?
Originally intended for use as a video connector in radar applications, the UHF coaxial connector was developed as a general-purpose unit for use in low-frequency systems from 0.6 - 300 MHz. Invented in the 1930s for use in the radio industry, UHF is an acronym for Ultra High Frequency because 300 MHz was considered high frequency at the time. They can be used when impedance matching is not required.
UHF connectors use threaded coupling. UHF connectors are economical and widely used because of their ease of assembly. The UHF solderable screw-in termination feature does not require a special crimping tool.
View of UHF Connector
Can be Customized for unique material or performance requirements
The connector design was invented in the 1930s for use in the radio industry, and is a shielded form of the "banana plug". It is a widely used standard connector for HF transmission lines on full-sized radio equipment.
Large size threaded couplings are a robust design
The Ultra High-Frequency (UHF) connector is a threaded coaxial connector that was developed in the 1930s by engineers at Amphenol. The UHF connector has individual male and female radio frequency connectors that form a mated connection by thread coupling.
Crimp termination type provides a lower cost method of installation
This is a cost-effective, robust radio-frequency connector that is suitable for general-purpose use.
- Antennas
- Military
- Distributed Antenna Systems (DAS)
- Public Address Systems
- Low-Frequency Applications
Scheda tecnica e risorse
id20220500797_rht-630-0070
Guida alla spedizione
Spedizione | Tempo di consegna | Metabee spedisce gli ordini una volta al giorno intorno alle 17:00, tranne la domenica. Una volta spedito, il tempo di consegna stimato dipende dal corriere che scegli. Spedizione Espressa: 3-7 giorni. Posta Standard: 7-20 giorni. | |
| Spese di spedizione | Le spese di spedizione per il tuo ordine sono disponibili nel carrello. | ||
| Opzioni di spedizione | Offriamo servizi di consegna espressa e standard. | ||
| Tracciamento spedizione | Dopo l'invio, ti invieremo il numero di tracciamento per email. Puoi monitorare l'ordine con la funzione "Traccia il mio ordine". | ||
| Reso/Garanzia | Reso | I resi sono generalmente accettati entro 30 giorni dalla data di spedizione. Contatta il servizio clienti per autorizzazione. I prodotti devono essere non utilizzati e nella confezione originale. Il cliente è responsabile delle spese di spedizione. | |
| Garanzia | Tutti gli acquisti Metabee includono una politica di rimborso 30 giorni e una garanzia di 1 anno contro difetti di fabbricazione. | ||
| Questa garanzia non si applica a prodotti difettosi causati da montaggio errato del cliente, mancato rispetto delle istruzioni, modifica del prodotto, uso negligente o improprio. | |||
| Ordine | Come acquistare | Metabee supporta ordini online. | |
| Aggiungi al carrello > Checkout > Invia ordine > Completa pagamento > Spedizione | |||
| Pagamento | PayPal, carta di credito (Visa, MasterCard, American Express), bonifico bancario. | ||
Ti consigliamo
Recensioni(30)
4 /5
Tutte le recensioni provengono da acquirenti verificati
5
37%
4
63%
3
0%
2
0%
1
0%
c****r
Ordered these so I could run a cb coax it to the cab of our motorhome. Very happy with how they worked
c****r
Ordered these so I could run a cb coax it to the cab of our motorhome. Very happy with how they worked
D****r
replaced ends on a couple old antenna and they work great. They solder up very well and the core takes a lot of heat with no damage. I will buy a larger pack of these to just have around for future upgrades.
D****r
replaced ends on a couple old antenna and they work great. They solder up very well and the core takes a lot of heat with no damage. I will buy a larger pack of these to just have around for future upgrades.
D****h
Installed very easy over a RG8 cable.
D****h
Installed very easy over a RG8 cable.
D****h
I would have liked the product to come with Teflon washers similar to the ones I purchased in the past.
D****h
I would have liked the product to come with Teflon washers similar to the ones I purchased in the past.
D****n
I would not call ANY MANUFACTURER'S PL-259 easy to install. All have the same difficulty not heating the connector and the coax braid hot enough to get the solder to flow on both. However silver plated connectors like this are the best of all the connectors. Other's use plating which does not accept solder well. These connectors are good quality and priced where they should sell well at right now.
D****n
I would not call ANY MANUFACTURER'S PL-259 easy to install. All have the same difficulty not heating the connector and the coax braid hot enough to get the solder to flow on both. However silver plated connectors like this are the best of all the connectors. Other's use plating which does not accept solder well. These connectors are good quality and priced where they should sell well at right now.
D****r
Good quality with Teflon Dielectric. No issues with melting during soldering.
D****r
Good quality with Teflon Dielectric. No issues with melting during soldering.
D****n
PL259. Put on the end of the coax. Fit. Worked.
D****n
PL259. Put on the end of the coax. Fit. Worked.
D****s
Love or that fact that I can replace those awful ends on the Wilson antenna from the factory and they even lowered my swr more
D****s
Love or that fact that I can replace those awful ends on the Wilson antenna from the factory and they even lowered my swr more
D****g
I bought some of those cheaper PL259 plugs with the brown colored plastic and was really disappointed with them when I tried to solder the center conductor only to find that the plastic melted. These, however, are much better. I have used two of them so far in setting up my ham shack and they soldered with no melting of the plastic material. Yes, these cost much more than the brown colored ones, but as they say - "you get what you pay for". Don't make the same mistake I did in buying the others - BUY THESE - they are worth it.
D****g
I bought some of those cheaper PL259 plugs with the brown colored plastic and was really disappointed with them when I tried to solder the center conductor only to find that the plastic melted. These, however, are much better. I have used two of them so far in setting up my ham shack and they soldered with no melting of the plastic material. Yes, these cost much more than the brown colored ones, but as they say - "you get what you pay for". Don't make the same mistake I did in buying the others - BUY THESE - they are worth it.
E****P
These are soooo much better, and only slightly more expensive. I just connected to RG142, the grip is so good I might not bother to solder.
Very nice.
E****P
These are soooo much better, and only slightly more expensive. I just connected to RG142, the grip is so good I might not bother to solder.
Very nice.
J****n
Easy to use and install. Sturdy construction used with a heavy duty ball mount.
J****n
Easy to use and install. Sturdy construction used with a heavy duty ball mount.
P****t
Everything fits together good. The surfaces took solder good.
P****t
Everything fits together good. The surfaces took solder good.
P****z
Good quality, easy to use and smooth transaction.
P****z
Good quality, easy to use and smooth transaction.
P****A
Perfect for the ham radio set up. Easy to use and solder.
P****A
Perfect for the ham radio set up. Easy to use and solder.
R****.
The design on the shielding soldering point is much better than others that have the larger holes. Additionally the plastic around the center pin seems more sturdy than other units I??ve used before. These did not melt during soldering.
R****.
The design on the shielding soldering point is much better than others that have the larger holes. Additionally the plastic around the center pin seems more sturdy than other units I??ve used before. These did not melt during soldering.
Disponibile
Qtà.
1
P.Unit.
€ 4.96
Totale
€ 4.96
€ 4.96
Qtà.
P.Unit.
Totale
1+
€4.96
€ 4.96
200+
€4.46
€ 892.00
1000+
€3.79
€ 3790.00
2000+
€3.04
€ 6080.00