サインイン
¥JPY
カート
製品を検索...
20cm 50オームRG58ケーブル付きSMAオス直角-SMAメスバルクヘッドケーブルアセンブリ
主要特徴
属性
値
検索
メーカー
レンホテック
色
黒
温度範囲
-40~+85
シールド
シールド付き
インピーダンス
50オーム
1番目のコネクタの方向
直角
最初の連絡先の性別
男
2番目の連絡先の性別
女性
2 番目のコネクタの方向
真っ直ぐ
変換スタイル
SMAからSMAへ
1番目のコネクタ
SMAプラグ
2番目のコネクタ
SMAジャック
説明
- Simple Construction, Good Stability and Cost-Effective
- Good resistance to electromagnetic interference
- Has excellent electrical and mechanical properties
- Strong adaptability to the environment
- Also perform very well over short distances such as home installations
Introduction to RF Cable
RF cable, also known as radio frequency cable, is a type of coaxial cable that is used to transmit radio frequency signals.RF cable is characterized by its ability to transmit high-frequency signals with minimal signal loss and interference.
It is constructed with a center conductor, an insulating layer, a braided or foil shield, and an outer jacket. The different components of the cable are designed to provide maximum signal integrity and protect the signal from external interference.
RF Cable Assemblies
RF Cable Assemblies Series
RF cables are cables used to transmit radio frequency signals. These signals can be used for various purposes, such as transmitting audio and video signals or communicating data transmission.
RF Cable Assembly Suitable Cable
For example, if the assembly will be used in a high-power RF application, a cable with low loss and high power handling capabilities will be required. In this case, a cable made from materials such as copper or silver-plated copper may be suitable.
- Radio communication systems
- Aerospace industry for accurate communication equipments
- Military and space application
- Ships and navy communication systems
- Satellite communications
- RF equipment in medicine and healthcare
証明書
ROHS Test Report AGC07686230401-004-RF Cable
ROHS Test Report AGC07686230401-004-RF Cable
ROHS Certificate AGC07686230401-C004 RF Cable Connector
ROHS Certificate AGC07686230401-C004 RF Cable Connector
REACH Test Report AGC07686230401-010 RF Cable Connector
REACH Test Report AGC07686230401-010 RF Cable Connector
配送ガイド
配送 | 配送期間 | Metabeeでは、日曜日を除く毎日17時頃に1日1回商品の発送を行っております。 発送後の配送目安は、お選びいただいた配送業者によって異なります。 お急ぎ便：3〜7日。 通常配送：7〜20日。 | |
| 送料 | 注文の送料はカートで確認できます。 | ||
| 配送オプション | 速達便と通常配送サービスを提供しております。 | ||
| 物流追跡 | 注文発送後、メールで運送番号をお知らせします。「注文追跡」機能で物流状況を確認できます。 | ||
| 返品/保証 | 返品 | 返品は通常発送後30日以内に完了する必要があります。返品承認のためカスタマーサービスに連絡してください。商品は未使用で元の梱包を維持してください。送料は顧客負担です。 | |
| 保証 | すべてのMetabee購入商品は、30日間無条件返品ポリシーと1年間のMetabee製造欠陥保証を受けます。 | ||
| この保証は、顧客の不適切な組み立て、取扱説明書の不遵守、製品改変、過失または不適切な使用による欠陥品には適用されません。 | |||
| 注文 | 購入方法 | Metabeeはオンライン注文をサポートしています。 | |
| カートに追加 > 決済 > 注文提出 > 支払い完了 > 発送 | |||
| 支払い | PayPal、クレジットカード（Visa、MasterCard、アメリカン・エキスプレス）、銀行振込。 | ||
あなたにおすすめ
レビュー(18)
4 /5
すべてのレビューは認証済み購入者からのものです
5
44%
4
56%
3
0%
2
0%
1
0%
K****.
No issue with them, connections seem solid. Time will tell.
K****.
No issue with them, connections seem solid. Time will tell.
L****r
We use these on test stands for RF testing, great product for the price. SMA connections, no issues to date, ordering more.
L****r
We use these on test stands for RF testing, great product for the price. SMA connections, no issues to date, ordering more.
L****y
Exactly what I was looking for to complete a fixed antenna mod on an Orange RX Module for Taranis. Nail on the head. Love it.
L****y
Exactly what I was looking for to complete a fixed antenna mod on an Orange RX Module for Taranis. Nail on the head. Love it.
M
Perfect size for 180-450mm quadcopter
M
Perfect size for 180-450mm quadcopter
M****l
I put a Cobra Firing Systems 18M reciver in a Seahorse SE-300 case. I bought a case, and used this antenna pigtail to extend the antenna to the outside of the case, just like Cobra does for their cases. I took the DIY approach and saved some money in the process. It works well and when I store the antenna inside the case, I protect the fitting with a dust cap to keep water and dirt out of the connector.
M****l
I put a Cobra Firing Systems 18M reciver in a Seahorse SE-300 case. I bought a case, and used this antenna pigtail to extend the antenna to the outside of the case, just like Cobra does for their cases. I took the DIY approach and saved some money in the process. It works well and when I store the antenna inside the case, I protect the fitting with a dust cap to keep water and dirt out of the connector.
M****.
Worked perfect on my Haulmark trailer. My trailer has a spoiler that overhangs the rear ramp door as seen in the picture. This meant I could only mount the camera antenna horizontally and it really affected the signal to the monitor. With this little wire, I was able to drill a hole through the spoiler and mount the antenna on top of the spoiler. Made all the difference in the world on the monitor, no lag, no freezing up and the monitor links to the camera instantly.
M****.
Worked perfect on my Haulmark trailer. My trailer has a spoiler that overhangs the rear ramp door as seen in the picture. This meant I could only mount the camera antenna horizontally and it really affected the signal to the monitor. With this little wire, I was able to drill a hole through the spoiler and mount the antenna on top of the spoiler. Made all the difference in the world on the monitor, no lag, no freezing up and the monitor links to the camera instantly.
M****t
Excellent cable that's very well built. As someone who owns a cable manufacturing company, I'm very pleased with how this product came out.
M****t
Excellent cable that's very well built. As someone who owns a cable manufacturing company, I'm very pleased with how this product came out.
S****.
Very nice little cable just what I needed Perfect for tight quarters.
S****.
Very nice little cable just what I needed Perfect for tight quarters.
S****h
Nice quality part. If I had one complaint, it's that the male end isn't long enough. It's meant to go through a bulkhead, but if said bulkhead has any real thickness to it, there won't be enough sticking through. The length, BTW, is just under 1/2". If your bulkhead thickness is 1/16" or less, you'll probably be ok. If so, I'd recommend. And I will be buying again, but will plan on milling a pocket for it.
S****h
Nice quality part. If I had one complaint, it's that the male end isn't long enough. It's meant to go through a bulkhead, but if said bulkhead has any real thickness to it, there won't be enough sticking through. The length, BTW, is just under 1/2". If your bulkhead thickness is 1/16" or less, you'll probably be ok. If so, I'd recommend. And I will be buying again, but will plan on milling a pocket for it.