로그인
₩KRW
장바구니
제품 검색...
스트레이트 UHF 수 클램프 케이블 유형
핵심 특징
데이터 시트 및 리소스
id20220500797_rht-630-0070
재고 있음
수량
1
단가
₩ 7215.00
총액
₩ 7215.00
₩ 7215.00
수량
단가
총액
1+
₩7,215
₩ 7215.00
200+
₩6,488
₩ 1297600.00
1000+
₩5,519
₩ 5519000.00
2000+
₩4,421
₩ 8842000.00
속성
값
검색
제조업체
렌호텍
정위
똑바로
커넥터 유형
플러그
체결방식
스레드
마무리에 문의
은
장착 유형
케이블 마운트
접촉 재료
놋쇠
쉘 마감
니켈 도금
단열재
PTFE
연락 유형
수 핀
쉴드 종단
집게
설명
- The threaded coupling mechanism is easy to assembly with high durability
- Can be Customized for unique material or performance requirements
- Crimp termination type provides a lower-cost method of installation
- Large-size threaded couplings are a robust design
- Low specification requirements and low cost
What is the UHF Connector?
Originally intended for use as a video connector in radar applications, the UHF coaxial connector was developed as a general-purpose unit for use in low-frequency systems from 0.6 - 300 MHz. Invented in the 1930s for use in the radio industry, UHF is an acronym for Ultra High Frequency because 300 MHz was considered high frequency at the time. They can be used when impedance matching is not required.
UHF connectors use threaded coupling. UHF connectors are economical and widely used because of their ease of assembly. The UHF solderable screw-in termination feature does not require a special crimping tool.
View of UHF Connector
Can be Customized for unique material or performance requirements
The connector design was invented in the 1930s for use in the radio industry, and is a shielded form of the "banana plug". It is a widely used standard connector for HF transmission lines on full-sized radio equipment.
Large size threaded couplings are a robust design
The Ultra High-Frequency (UHF) connector is a threaded coaxial connector that was developed in the 1930s by engineers at Amphenol. The UHF connector has individual male and female radio frequency connectors that form a mated connection by thread coupling.
Crimp termination type provides a lower cost method of installation
This is a cost-effective, robust radio-frequency connector that is suitable for general-purpose use.
- Antennas
- Military
- Distributed Antenna Systems (DAS)
- Public Address Systems
- Low-Frequency Applications
데이터 시트 및 리소스
id20220500797_rht-630-0070
배송 가이드
배송 | 배송 기간 | Metabee는 일요일을 제외하고 매일 오후 5시경에 주문하신 상품을 발송합니다. 발송 후 예상 배송 시간은 고객님이 선택하신 배송업체에 따라 달라집니다. 특송: 3~7일. 일반 우편: 7~20일. | |
| 배송비 | 주문 배송비는 장바구니에서 확인할 수 있습니다. | ||
| 배송 옵션 | 저희는 특송 및 일반 배송 서비스를 제공합니다. | ||
| 물류 추적 | 주문 발송 후 이메일로 운송장 번호를 보내드리며, 「내 주문 추적」 기능으로 물류를 조회할 수 있습니다. | ||
| 반품/보증 | 반품 | 반품/교환은 일반적으로 발송 후 30일 내에 완료해야 하며, 고객 서비스에 연락하여 반품 승인을 받으세요. 상품은 사용하지 않은 상태여야 하며 원래 포장을 유지해야 합니다. 배송비는 고객이 부담합니다. | |
| 보증 | 모든 Metabee 구매 상품은 30일 무조건 반품 정책과 1년 Metabee 보증(제조 결함 대상)을 받습니다. | ||
| 본 보증은 고객의 잘못된 조립, 설명서 미준수, 제품 수정, 부주의 또는 부적절한 사용으로 인한 결함 상품에는 적용되지 않습니다. | |||
| 주문 | 구매 방법 | Metabee는 온라인 주문을 지원합니다. | |
| 장바구니에 추가 > 결제 > 주문 제출 > 결제 완료 > 배송 | |||
| 결제 | PayPal, 신용카드(Visa, MasterCard, 아메리칸 익스프레스), 은행 송금. | ||
당신에게 추천
리뷰(30)
4 /5
모든 리뷰는 인증된 구매자로부터 나옵니다
5
37%
4
63%
3
0%
2
0%
1
0%
c****r
Ordered these so I could run a cb coax it to the cab of our motorhome. Very happy with how they worked
c****r
Ordered these so I could run a cb coax it to the cab of our motorhome. Very happy with how they worked
D****r
replaced ends on a couple old antenna and they work great. They solder up very well and the core takes a lot of heat with no damage. I will buy a larger pack of these to just have around for future upgrades.
D****r
replaced ends on a couple old antenna and they work great. They solder up very well and the core takes a lot of heat with no damage. I will buy a larger pack of these to just have around for future upgrades.
D****h
Installed very easy over a RG8 cable.
D****h
Installed very easy over a RG8 cable.
D****h
I would have liked the product to come with Teflon washers similar to the ones I purchased in the past.
D****h
I would have liked the product to come with Teflon washers similar to the ones I purchased in the past.
D****n
I would not call ANY MANUFACTURER'S PL-259 easy to install. All have the same difficulty not heating the connector and the coax braid hot enough to get the solder to flow on both. However silver plated connectors like this are the best of all the connectors. Other's use plating which does not accept solder well. These connectors are good quality and priced where they should sell well at right now.
D****n
I would not call ANY MANUFACTURER'S PL-259 easy to install. All have the same difficulty not heating the connector and the coax braid hot enough to get the solder to flow on both. However silver plated connectors like this are the best of all the connectors. Other's use plating which does not accept solder well. These connectors are good quality and priced where they should sell well at right now.
D****r
Good quality with Teflon Dielectric. No issues with melting during soldering.
D****r
Good quality with Teflon Dielectric. No issues with melting during soldering.
D****n
PL259. Put on the end of the coax. Fit. Worked.
D****n
PL259. Put on the end of the coax. Fit. Worked.
D****s
Love or that fact that I can replace those awful ends on the Wilson antenna from the factory and they even lowered my swr more
D****s
Love or that fact that I can replace those awful ends on the Wilson antenna from the factory and they even lowered my swr more
D****g
I bought some of those cheaper PL259 plugs with the brown colored plastic and was really disappointed with them when I tried to solder the center conductor only to find that the plastic melted. These, however, are much better. I have used two of them so far in setting up my ham shack and they soldered with no melting of the plastic material. Yes, these cost much more than the brown colored ones, but as they say - "you get what you pay for". Don't make the same mistake I did in buying the others - BUY THESE - they are worth it.
D****g
I bought some of those cheaper PL259 plugs with the brown colored plastic and was really disappointed with them when I tried to solder the center conductor only to find that the plastic melted. These, however, are much better. I have used two of them so far in setting up my ham shack and they soldered with no melting of the plastic material. Yes, these cost much more than the brown colored ones, but as they say - "you get what you pay for". Don't make the same mistake I did in buying the others - BUY THESE - they are worth it.
E****P
These are soooo much better, and only slightly more expensive. I just connected to RG142, the grip is so good I might not bother to solder.
Very nice.
E****P
These are soooo much better, and only slightly more expensive. I just connected to RG142, the grip is so good I might not bother to solder.
Very nice.
J****n
Easy to use and install. Sturdy construction used with a heavy duty ball mount.
J****n
Easy to use and install. Sturdy construction used with a heavy duty ball mount.
P****t
Everything fits together good. The surfaces took solder good.
P****t
Everything fits together good. The surfaces took solder good.
P****z
Good quality, easy to use and smooth transaction.
P****z
Good quality, easy to use and smooth transaction.
P****A
Perfect for the ham radio set up. Easy to use and solder.
P****A
Perfect for the ham radio set up. Easy to use and solder.
R****.
The design on the shielding soldering point is much better than others that have the larger holes. Additionally the plastic around the center pin seems more sturdy than other units I??ve used before. These did not melt during soldering.
R****.
The design on the shielding soldering point is much better than others that have the larger holes. Additionally the plastic around the center pin seems more sturdy than other units I??ve used before. These did not melt during soldering.
재고 있음
수량
1
단가
₩ 7215.00
총액
₩ 7215.00
₩ 7215.00
수량
단가
총액
1+
₩7,215
₩ 7215.00
200+
₩6,488
₩ 1297600.00
1000+
₩5,519
₩ 5519000.00
2000+
₩4,421
₩ 8842000.00