Корзина

Прямой кабель с зажимом UHF типа «папа»

SKU: ID20220500797
MPN: RHT-630-0070

Ключевые характеристики

  • Механизм резьбового соединения прост в сборке и отличается высокой прочностью.
  • Может быть изготовлен по индивидуальному заказу в соответствии с уникальными требованиями к материалу или характеристикам.
  • Тип обжимного соединения обеспечивает более дешевый метод установки.
  • Резьбовые соединения большого размера представляют собой надежную конструкцию.
  • Низкие требования к спецификациям и низкая стоимость.
Техническое описание и ресурсы
id20220500797_rht-630-0070

id20220500797_rht-630-0070

В наличии
Кол-во.
1
**Цена за ед.**
$ 5.06
Общая цена
$ 5.06
$ 5.06
Кол-во.
**Цена за ед.**
Общая цена
1+
$5.06
$ 5.06
200+
$4.55
$ 910.00
1000+
$3.87
$ 3870.00
2000+
$3.10
$ 6200.00
Атрибут
Значение
Производитель
Ренотек
Ориентация
Прямой
Тип разъема
Затыкать
Тип крепления
Резьбовой
Контакт Готово
Серебро
Тип монтажа
Кабельное крепление
Контактный материал
Латунь
Отделка ракушки
Никелированный
Изоляционный материал
PTFE
Тип контакта
Мужской контакт
Прекращение действия щита
Зажим
Описание
  • The threaded coupling mechanism is easy to assembly with high durability
  • Can be Customized for unique material or performance requirements
  • Crimp termination type provides a lower-cost method of installation
  • Large-size threaded couplings are a robust design
  • Low specification requirements and low cost

What is the UHF Connector?

Originally intended for use as a video connector in radar applications, the UHF coaxial connector was developed as a general-purpose unit for use in low-frequency systems from 0.6 - 300 MHz. Invented in the 1930s for use in the radio industry, UHF is an acronym for Ultra High Frequency because 300 MHz was considered high frequency at the time. They can be used when impedance matching is not required.

UHF connectors use threaded coupling. UHF connectors are economical and widely used because of their ease of assembly. The UHF solderable screw-in termination feature does not require a special crimping tool.

View of UHF Connector


Can be Customized for unique material or performance requirements

The connector design was invented in the 1930s for use in the radio industry, and is a shielded form of the "banana plug". It is a widely used standard connector for HF transmission lines on full-sized radio equipment.


Large size threaded couplings are a robust design

The Ultra High-Frequency (UHF) connector is a threaded coaxial connector that was developed in the 1930s by engineers at Amphenol. The UHF connector has individual male and female radio frequency connectors that form a mated connection by thread coupling.


Crimp termination type provides a lower cost method of installation

This is a cost-effective, robust radio-frequency connector that is suitable for general-purpose use. 

  • Antennas
  • Military
  • Distributed Antenna Systems (DAS)
  • Public Address Systems
  • Low-Frequency Applications
Техническое описание и ресурсы
id20220500797_rht-630-0070

id20220500797_rht-630-0070

Руководство по доставке
Доставка
Срок доставки
Metabee отправляет заказы один раз в день около 17:00, за исключением воскресенья.
После отправки расчетное время доставки зависит от выбранной вами службы доставки.
Экспресс-доставка: 3–7 дней.
Стандартная почта: 7–20 дней.
Тарифы на доставкуТарифы на доставку вашего заказа можно найти в корзине.
Варианты доставкиМы предлагаем услуги экспресс-доставки и стандартной доставки.
Отслеживание доставкиМы уведомим вас по электронной почте с номером отслеживания после отправки заказа. Вы можете отслеживать заказ с помощью функции «Отследить мой заказ».
Возврат/ГарантияВозвратВозвраты обычно принимаются, если завершены в течение 30 дней с даты отправки. Для получения разрешения на возврат свяжитесь со службой поддержки клиентов. Детали должны быть неиспользованными и в оригинальной упаковке. Клиент несет расходы на доставку
ГарантияВсе покупки в Metabee поставляются с 30-дневной политикой возврата денег плюс 1-летняя гарантия Metabee от производственных дефектов.
Эта гарантия не распространяется на изделия, дефекты которых вызваны неправильной сборкой клиентом, несоблюдением инструкций клиентом, модификацией продукта, халатной или неправильной эксплуатацией
ЗаказКак купитьMetabee принимает онлайн-заказы.
Добавить в корзину > Оформить заказ > Подать заказ > Завершить оплату > Доставка
ОплатаPayPal, Кредитная карта (Visa, MasterCard, American Express), Банковский перевод.
Рекомендуем для вас
Отзывы(30)
4 /5
Все отзывы от проверенных покупателей
5
37%
4
63%
3
0%
2
0%
1
0%
c****r
Ordered these so I could run a cb coax it to the cab of our motorhome. Very happy with how they worked
c****r
Ordered these so I could run a cb coax it to the cab of our motorhome. Very happy with how they worked
D****r
replaced ends on a couple old antenna and they work great. They solder up very well and the core takes a lot of heat with no damage. I will buy a larger pack of these to just have around for future upgrades.
D****r
replaced ends on a couple old antenna and they work great. They solder up very well and the core takes a lot of heat with no damage. I will buy a larger pack of these to just have around for future upgrades.
D****h
Installed very easy over a RG8 cable.
D****h
Installed very easy over a RG8 cable.
D****h
I would have liked the product to come with Teflon washers similar to the ones I purchased in the past.
D****h
I would have liked the product to come with Teflon washers similar to the ones I purchased in the past.
D****n
I would not call ANY MANUFACTURER'S PL-259 easy to install. All have the same difficulty not heating the connector and the coax braid hot enough to get the solder to flow on both. However silver plated connectors like this are the best of all the connectors. Other's use plating which does not accept solder well. These connectors are good quality and priced where they should sell well at right now.
D****n
I would not call ANY MANUFACTURER'S PL-259 easy to install. All have the same difficulty not heating the connector and the coax braid hot enough to get the solder to flow on both. However silver plated connectors like this are the best of all the connectors. Other's use plating which does not accept solder well. These connectors are good quality and priced where they should sell well at right now.
D****r
Good quality with Teflon Dielectric. No issues with melting during soldering.
D****r
Good quality with Teflon Dielectric. No issues with melting during soldering.
D****n
PL259. Put on the end of the coax. Fit. Worked.
D****n
PL259. Put on the end of the coax. Fit. Worked.
D****s
Love or that fact that I can replace those awful ends on the Wilson antenna from the factory and they even lowered my swr more
D****s
Love or that fact that I can replace those awful ends on the Wilson antenna from the factory and they even lowered my swr more
D****g
I bought some of those cheaper PL259 plugs with the brown colored plastic and was really disappointed with them when I tried to solder the center conductor only to find that the plastic melted. These, however, are much better. I have used two of them so far in setting up my ham shack and they soldered with no melting of the plastic material. Yes, these cost much more than the brown colored ones, but as they say - "you get what you pay for". Don't make the same mistake I did in buying the others - BUY THESE - they are worth it.
D****g
I bought some of those cheaper PL259 plugs with the brown colored plastic and was really disappointed with them when I tried to solder the center conductor only to find that the plastic melted. These, however, are much better. I have used two of them so far in setting up my ham shack and they soldered with no melting of the plastic material. Yes, these cost much more than the brown colored ones, but as they say - "you get what you pay for". Don't make the same mistake I did in buying the others - BUY THESE - they are worth it.
E****P
These are soooo much better, and only slightly more expensive. I just connected to RG142, the grip is so good I might not bother to solder. Very nice.
E****P
These are soooo much better, and only slightly more expensive. I just connected to RG142, the grip is so good I might not bother to solder. Very nice.
J****n
Easy to use and install. Sturdy construction used with a heavy duty ball mount.
J****n
Easy to use and install. Sturdy construction used with a heavy duty ball mount.
P****t
Everything fits together good. The surfaces took solder good.
P****t
Everything fits together good. The surfaces took solder good.
P****z
Good quality, easy to use and smooth transaction.
P****z
Good quality, easy to use and smooth transaction.
P****A
Perfect for the ham radio set up. Easy to use and solder.
P****A
Perfect for the ham radio set up. Easy to use and solder.
R****.
The design on the shielding soldering point is much better than others that have the larger holes. Additionally the plastic around the center pin seems more sturdy than other units I??ve used before. These did not melt during soldering.
R****.
The design on the shielding soldering point is much better than others that have the larger holes. Additionally the plastic around the center pin seems more sturdy than other units I??ve used before. These did not melt during soldering.
В наличии
Кол-во.
1
**Цена за ед.**
$ 5.06
Общая цена
$ 5.06
$ 5.06
Кол-во.
**Цена за ед.**
Общая цена
1+
$5.06
$ 5.06
200+
$4.55
$ 910.00
1000+
$3.87
$ 3870.00
2000+
$3.10
$ 6200.00